| WINDING DIRECTION | Generally printed or clear lacquer side is out with heat seal coating inside. | ||||||||||||||||||||||||||||
| CORE | Material options: (a) Plastic (b) Aluminium (c) Card Board Core ID: 76 mm +/- 0.5 mm The length of the core is equal to the width of the web. |
||||||||||||||||||||||||||||
| SPICES | Butt type made with 25 mm pressure-sensitive tape. | ||||||||||||||||||||||||||||
| REEL OUTER DIAMETER | 250 +/- 10 mm for slit material, 400 +/- 10 mm for Jumbos | ||||||||||||||||||||||||||||
| REEL WANDER | Within +/- 1 mm | ||||||||||||||||||||||||||||
| REEL/WEB WIDTH | Plain: 45mm to 800 mm with a tolerance of +/- 0.5 mm. Printed: 45mm to 600 mm with a tolerance of +/- 0.5 mm |
||||||||||||||||||||||||||||
| JOINTS PER REEL | Maximum 2. Average less than 1. | ||||||||||||||||||||||||||||
| PIN HOLES | 0.025 and 0.03 mm foils are free from pin holes. In 0.02 mm foil, 40% of foil is free from pin holes, rest less than 10 PSM |
||||||||||||||||||||||||||||
| IDENTIFICATION | Each reel shall be identified with a sticker pasted inside the core with Reel numbers. Specification, Net weight, Operator number & Date manufacture. |
||||||||||||||||||||||||||||
| PACKING | Blister foils are packed in cardboard carton. Relevant markings are provided on each outer package. | ||||||||||||||||||||||||||||
| RECOMMENDED OPERATING CONDITIONS | Sealing temperature: 170 to 180 deg. C Sealing pressure: 2.8 to 5.6 kg/Sq. cm, 40 to 80 lbs/Sq. inch Dwell time: 0.25 to 0.5 sec. |
||||||||||||||||||||||||||||
| COVERING AREA OF 1 Kg FINISHED MATERIAL (NOMINAL) |
Gauge & Temper Foil 0.02 (hard) - 17.18 Sq. M/Kg 0.025 (hard) - 13.94 Sq. M/Kg 0.03 (hard) - 11.72 Sq. M/Kg |
||||||||||||||||||||||||||||
| TABLE SHOWING THICKNESS TOLERANCES OF FOIL | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| TEST CERTIFICATES | Test certificates giving the actual observed values of different parameters will accompany the supplies. | ||||||||||||||||||||||||||||